Paket NodeMCU Amica V3 WiFi (4MB Flash) + Base Plate L293D – Modul ESP8266 untuk Proyek IoT & Robotik

 ESP-0040
========
Kenapa CNC STORE BANDUNG?
Produk high quality
Ada garansi 14 hari
Bisa tanya teknis & dibantu
Cocok untuk teknisi, pelajar, & DIY

==== Deskripsi ====
Insan Bangor pernah kepikiran bikin robot simple, mobil remote WiFi, atau kontrol motor via HP tapi ribet nyari modul satu-satu?
Tenang, paket ini udah komplit tinggal rakit — NodeMCU Amica buat bagian otaknya dan Motor Shield L293D buat ngangkat motornya.
Cuma colok, upload kode, langsung jalan!

Paket ini terdiri dari NodeMCU Amica V3 (ESP8266) + Motor Driver Shield L293D, cocok untuk pemula sampai maker yang mau bikin:
– Robot mobil 2WD
– Smart car / line follower
– IoT control berbasis WiFi
– Smart gate / servo control
– Proyek otomatisasi kecil

NodeMCU Amica punya WiFi bawaan, sedangkan Motor Shield L293D bisa mengemudikan 2 motor DC sekaligus atau 1 motor stepper.
Keduanya langsung kompatibel — tinggal tancap, tanpa solder-solder rumit.

==== Spesifikasi ====
NodeMCU Amica Lua V3 – ESP8266 
– Chipset: ESP8266EX
– Flash Memory: 4MB
– WiFi: 802.11 b/g/n (2.4 GHz)
– Pin I/O:
+ 11 GPIO (PWM, I2C, SPI, UART)
+ ADC 10-bit
+ Regulator onboard: 3.3V
+ USB: Micro USB
+ Programming: Arduino IDE / Lua / MicroPython

Base Plate L293D Motor Driver – Shield Board 
– Driver IC: L293D Dual H-Bridge Motor Driver
– Kapasitas Motor: 2x Motor DC (M1 & M2) atau 1x Motor Stepper
– Arus maksimum: 600mA per channel (peak 1.2A)
– Tegangan input motor: 4.5 – 12V
– Tegangan logic: 5V onboard regulator
– Fitur tambahan:
Tombol reset
Tombol fungsi / input
Header GPIO NodeMCU lengkap
Clamp power motor
LED indikator power
– Fitur lainnya:
– Deep sleep mode (hemat daya)
– OTA Update (upload firmware via WiFi)
– Kompatibel Blynk, MQTT, Firebase, Telegram Bot

==== Fitur ====
– Power input:Logic Operating current Iss: 60mA (Vi = L), 22mA (Vi = H);
– Motor Power (VM): 4.5V ~ 36V, can be a separately power supply;
– Control power supply (VIN): 4.5V ~ 9V (10VMAX), may be a separate power supply;
– Module provides short-circuit sub (short the VM and VIN), you can easily use one power (which must be 4.5V ~ 9V) simultaneously drive and control the motor;
– Working current driving portion Io: 1.2A;
– Maximum power dissipation: 4W (T = 90 )
– Control signal input level: High: 2.3VVIHVIN; Low: -0.3VVIL1.5V
– Working temperature: -25 ~ + 125
– Drive Type: Dual high-power H-bridge driver
– ESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor)
– Module Net Weight: about 20g
 

==== Aplikasi ====
– Robot WiFi / Mobile Robot
– IoT dengan motor penggerak .dll

==== Paket ====
1 x NodeMCU Amica Lua V3 ESP8266 – 4MB Flash
1 x Base Plate / Shield L293D Motor Driver